Our packaging
A device from Revendo has already passed through many hands—and is meant to last for many more years. To ensure it reaches you safely, it needs packaging that is just as thoughtfully designed as the refurbishment itself. Since we couldn’t find what we were looking for on the market, we developed our packaging ourselves together with Swiss packaging specialists: one for smartphones, and one for MacBooks, laptops, and Tablets.
What applies to all our packaging
Maximum protection
The device must withstand transport undamaged—that is the most important requirement for packaging refurbished Electronics.
As little empty space as possible
As large as necessary, as small as possible. Every centimeter we save means less air in storage and during transport.
Fully recyclable
All components belong in the paper and cardboard recycling stream—you don’t need to take anything apart or dispose of it separately.
Renewable, certified raw materials
We use FSC®-certified cardboard and avoid plastic wherever possible.
Easy handling and frustration-free unboxing
The packaging should be quick to fill and just as easy to open again.
Reusable
Reusing the packaging extends its lifespan—fully in line with our business model.
That’s why we develop our own packaging.
Standard boxes rarely meet all these requirements at the same time: either they offer good protection but are unnecessarily large, or they are compact but less secure.
That is why we took the opposite approach and developed our packaging from the ground up for our devices - precisely tailored to the actual dimensions of smartphones, Tablets, and notebooks. The result is two types of packaging that do exactly what they are supposed to do and can then be fully recycled as paper.
The smartphone packaging
From parcel to letter: For all common smartphones, we have developed our own packaging design that is 70% flatter than before and fits through your mailbox slot. The packaging is in B5 format and less than 2 cm high, so your smartphone can be shipped as a letter and delivered directly to your mailbox without compromising protection:
Where the old packaging achieved protection through its size, two cardboard pockets now hold your smartphone in place at both ends. Because they are set back from the edges, the device is well protected from the outside, and impacts are absorbed before they reach it. The included charging cable fits in one of the side pockets, separate from the device, so nothing slides around inside the packaging. It can be opened using a pre-perforated paper tear strip instead of plastic, and your device is immediately visible in front of you instead of being covered by a fixture as it was before. As with the old packaging, we use corrugated cardboard, FSC-certified, with 80% recycled content and printed with mineral-oil-free, water-based inks, so after use the packaging can be fully recycled with paper.
This packaging is more than a shipping box for us. It accompanies the smartphone all the way to you, from the moment it enters our circular system until it reaches your mailbox. It is also easier for our team: Instead of setting up a box in several steps, the smartphone is placed inside and the packaging is folded shut. It can be temporarily closed with tabs, which is why we already use it for internal transfers and storage. We only seal it permanently with the integrated adhesive strip immediately before shipping. And even after opening, the packaging is not at the end of its life: The tear strip does not permanently damage it, so you can fold it shut, seal it with ordinary adhesive tape, and reuse it, for example, for a return shipment. And because the new packaging is so flat, we save twice over. In the warehouse, around 67% more of them now fit in the same area: Where three packages used to be stacked on top of one another, five now stand side by side, each within easy reach. In shipping, a shipment now requires 32% less volume. This is based on the external dimensions: The old smartphone packaging has a volume of 1,140 cm³ (19 × 10 × 6 cm), while the new one has a volume of 778.05 cm³ (24.7 × 17.5 × 1.8 cm). This packaging has been in use at our company since 2022 and has proven itself thousands of times since then, on every leg of its journey through our circular system.
Packaging for laptops and Tablets
Larger and heavier devices need more protection. That’s why our packaging comes in two sizes, both built on the same principle: a smaller one for tablets from 9.7 inches and a larger one for large tablets and laptops. Here, we add a PE film to the cardboard box to secure the device and protect it from impacts and moisture. This plastic is safe for health, durable, and recyclable—and makes up such a small share of the packaging that you can put it in the cardboard recycling along with the film.
Here too, we optimized the dimensions and significantly reduced empty space. The smaller package now uses 51% less volume than before: it measures 22 × 33.4 × 5 cm instead of 24.5 × 41 × 7.5 cm, or 3'674 instead of 7'534 cm³. The larger package uses 44% less: it now measures 30 × 44 × 11 cm instead of 35 × 60 × 12.4 cm, or 14'520 instead of 26'040 cm³.
In the long term, we also want to eliminate plastic from packaging for larger devices. We have already achieved this with smartphone packaging.